C-SERIES
The clever connection
CLAW SLEEVES, WALL & CEILING TRANSITIONS
Connected quickly and easily
The C-Series combines the latest technoglogy from grommets, sleeves and claw sleeves. Thanks to the in-house conduit grip technoglogy, the transitions and connectors guarantee absolutely reliable strain relief in concrete construction – regardless of which conduit manufacturer is used. Additional fixation with adhesive tape or other expedients, as it was previously the case, is no longer necessary.
The special highlight of the new series are the optional wings, with which the C-Series can be attached directly to the steel reinforcement. Concrete coverings of 20 to 40 mm can be achieved – depending on the direction of attachment – without any counter bearing or support element.
Due to the standard screw bosses, there is no need for additional drilling after mounting the sleeves, transitions and grommets. Due to their small design, the plastic parts can be used even with very narrow steel reinforcements or for the continuation of conduits under the screed without any problems. Thus, every electrician delivers high-quality work in a short time. See for yourself.
The C-Series in action!
Accessories for the highest quality
With the help of the claw sleeves, available in sizes M20, M25, M32 and M40, two conduit ends can be connected securely and concrete-tight with just one movement.
The claw sleeves are then placed on the nail and adhesive base to form the end and transition grommet. Using the well-thought-out plug-in system, several grommets, regardless of size, can be lined up and combined.The same base is also used by the sleeves, which means they can be stacked stably on grommets.
Thanks to the ideal bending radius of 30°, the wall and ceiling transitions enable safe and comfortable insertion of cables. The support anchor gives the sleeves (available in sizes M20, M25 and M32) the perfect hold and thus prevents them from being torn out of the formwork.
All five variants impress with absolute concrete tightness and reliable strain relief.
Downloads:
WALL & CEILING TRANSITIONS
All advantages at a glance!
Easy installation in ceiling
or wall in just a few steps
1
Easy installation on the steel reinforcement thanks to Push-on Wings.
2
The smart design makes it ideal for installation situations with a lot of reinforcement.
3
Insert conduits into both ends of the claw sleeve to connect them securely and stably.
1
Nail base onto the formwork. Integrated nail fixation enables easy installation. Thanks to the plug-in system, grommets and sleeves can be arranged flexible.
2
For sizes C32 and C40, two nail guides on the side provide additional support.
3
Place the sleeve or claw sleeve on the nail base.
4
Insert conduits without tools. Sleeves offer ideal bending radius according to DIN standard.
5
The conduit grip guarantees reliable strain relief.
6
Insert two conduit ends into the claw sleeve to connect them stably.
7
Easy installation on the steel reinforcement thanks to Push-on Wings.
8
After concreting, the opening can be broken out with a screwdriver.
9
Continuation of installation conduits with reliable strain relief.
10
Flexible pulling in of conduits from both directions.
11
Use as a wall outlet for cable routing in hollow ceilings.
1
Nail base onto the formwork. Integrated nail fixation enables easy installation. Thanks to the plug-in system, grommets and sleeves can be arranged flexible.
2
For sizes C32 and C40, two nail guides on the side provide additional support.
3
Thanks to its low height, it is ideal for installation situations with a lot of reinforcement.
4
Place the sleeve or claw sleeve on the nail base.
5
Insert conduits without tools. Sleeves offer ideal bending radius according to DIN standard.
6
After concreting, the opening can be broken out with a screwdriver.
7
Ceiling sleeve for installation in lightweight walls.
8
Continuation of installation conduits with reliable strain relief.
9
Integrated dowel function for easy installation of attachments.
Accessories for high-quality electrical installation in cast-in-place concrete
YOU MIGHT ALSO BE INTERESTED IN:
Further solutions for concrete installation
How many Newtons can the claw sleeves hold?
The claw sleeves hold up to 380 N.
Which conduits do the claw sleeves hold?
Thanks to the conduit grip technology, the transitions and connectors ensure absolutely reliable strain relief – regardless of which conduit manufacturer is used. Additional fixation with adhesive tape or other expedients, as it was previously the case, is no longer necessary.
What is the support on the sleeve for?
This is the support anchor. It supports the sleeve and gives it additional stability so it doesn’t break.
Can the C-Series grommets and sleeves / wall and ceiling transitions be combined with each other?
Yes, thanks to the thought-out plug-in system of the C-Series, all sizes can be combined safely and securely.
Can a conduit be continued into a drywall after concreting?
Yes, since our starting product is a claw sleeve, continuing is not a problem.
Does the conduit stay in the transitions?
Yes, thanks to the conduit grip of the wall and ceiling transitions, everything is reliably strain-relieved and absolutely concrete-tight.
Do the Wings hold on the C-Series?
Yes, the Wings hold on to all Primo concrete products: Membrane Boxes, Installation Housings, Universal Junction Boxes, Grommets, Sleeves and Wall and Ceiling Transitions.
Do you have any questions about our products? We are there for You
„The C-Series completely convinced us in terms of price-performance and functionality. The handling is really easy and practical and the products are very versatile.“