THE PRIMO SIGNAL COVER
One cover, many advantages
Signal Cover
The Primo Signal Cover
Unlike comparable products, the Primo Universal Plaster Cover is convex to minimize the thickness of the applied plaster on the box. Combined with the signal pin in the signal colour red, the flush-mounting box is quickly found.
For clean contours without plaster breakouts, the stable Signal Cover is pressed in and automatically pops outwards again. Now the cover can be conveniently removed by hand or with the help of the centring hole with a 68 mm holesaw. Thanks to the standardized size of the flush-mounting cover, it can be easily attached to all standard boxes. The red Signal Cover can also be used without any problems when the building site cools down below freezing.
The Primo Signal Cover in action!
Plaster Cover - the Signal Cover for flush-mounting boxes
The Signal Cover, which is standardized for all switch boxes, is particularly stable and suitable for repeated use. The signal pins combined with the convex cover reach a height of 2,5 centimeters. The red signal pins can therefore be found quickly even with a thick plaster layer. The Universal Plaster Cover can be easily removed by hand or using the centering drill hole with a drill bit with a diameter of 68 millimeters, without the surrounding plaster crumbling off.
Universal Plaster Cover UP
Less plaster application due to external curvature, can be used several times
Downloads:
SIGNAL COVER FROM PRIMO
All advantages at a glance!
Easy assembly
in just a few steps
1
After plastering, the Signal Cover stands proud.
2
Tap lightly on the Signal Cover with the hammer.
3
Finally, remove the Signal Cover with a screwdriver.
1
Mill around the Signal Cover with a 68 mm holesaw.
2
A clean contour without breakages is created.
3
25 seconds = 5 boxes
Accessories for the fastest flush-mounting system in the world
Thermo Box
Equipment Carrier
Thermo Foam
High Speed Driller Set
Drilling Template
YOU MIGHT ALSO BE INTERESTED IN:
Further flush-mounting solutions
Why is there a hole in the Signal Cover?
The hole in the center of the Signal Cover serves as a centering hole. This allows the plaster cover to be removed in a flash using a 68 mm core bit without causing the surrounding plaster to crumble.
Why is the Signal Cover curved outwards?
Unlike comparable products, the Primo Signal Cover is curved outwards to minimize the thickness of the applied plaster on the box. Combined with the signal pin in the signal colour red, the flush-mounting box is quickly found.
Are the Signal Covers reusable?
Yes, the Signal Covers are reusable and thus ensure sustainable and resource-saving use of materials.
Do you have any questions about our products? We are there for You
