THE PRIMO THERMO BOX
The right flush-mounting box for every renovation project
PRIMO THERMO BOX
The fastest flush-mounting system in the world
One of the greatest challenges when renovating old buildings is the uncertainty as to which material is hidden behind the visible walls. And with that, of course, the question of which flush mounting box is best suited. With the Primo Thermo Box, this question no longer arises. Thanks to the membrane teeth, the Thermo Box finds a hold in any material It’s then installed in a few seconds with the specially developed Thermo Foam. Laborious plastering as with conventional products is no longer necessary. With the SCS connection technology, several Thermo Boxes can be lined up and firmly connected – ideal for fast through-wiring or the installation of pre-wired devices. In addition, thanks to the in-house Cable-Plopp technology, cables can now be inserted completely without tools. Convince yourself of the “Fastest Flush Mounting System In The World”.
Installation in a plastered wall
Installation in a unplastered wall
The Thermo Box Series consists of three boxes:
All parts can be firmly connected to one another and are suitable for all masonry. In addition, the blue-orange innovations can be used perfectly outdoors or in bathrooms. The numerous entries and the smart design of the flush mounting boxes make handling easier. An 82 mm drill hole is sufficient for installation (in case of the TED-70, two times 82 mm with a broken-off bar). Use the Primo high-speed drill as well as the drilling template and professional installation will be child’s play in no time at all.
Thermo Box THD-70
Depth 68 mm, installation opening 60 mm, width (with plaster stop) 105 mm
Thermo Box THD-45
Depth 46 mm, installation opening 60 mm, width (with plaster stop) 105 mm
Thermo Box TED-70
depth 68 mm, installation opening 60 mm or 2x 60 mm, width (with plaster stop) 105 mm
Downloads:
THERMO BOX SYSTEM FROM PRIMO
All advantages at a glance!
Simple installation in a few steps
1
Mark the first box and drill with the Primo high-speed drill a 82 mm hole.
2
For multiple combinations, insert the drilling template into the first hole. Tighten the lever and align it using the integrated spirit level. Drill more holes with standardized combination spacing of 71 mm by moving the template.
3
Mill slots and moisten the hole so that the foam swells even better.
4
The membrane teeth fix the box securely in the hole. This enables the time-saving installation of already piped boxes.
5
Insert the boxes up to the plaster stop. This guarantees standard-compliant and plaster-flush installation.
6
With a plastered wall, simply break off the plaster stop and insert the boxes completely.
7
Use the foam pistol to break out the predetermined breaking point in the rear of the box and inject the foam until the box is completely enclosed. After 30 minutes the foam is cut-resistant.
8
Push the cables through the Cable-Plopp to insert them absolutely tool-free.
9
Attach the convex plaster cover to the 61 mm opening of the box to protect the screw bosses and the inside of the box, as well as to reduce the plaster application.
10
The signal pins help you to find the box quickly. Push in the cover with your finger or a screwdriver. When it pops outwards, a clean contour is created without offsets in the plaster. Then remove the cover.
11
Alternatively, expose the plaster cover with a 68 mm holesaw and remove it at the same time.
12
For multiple connections, remove the web between the SCS rails.
13
Once the web is cut through, wire electronic components in the large installation space or directly insert pre-wired devices.
14
Flexible alignment of the devices thanks to three screw bosses.
15
Complete the installation!
Accessories for the fastest flush-mounting system in the world
Signal Cover
Equipment Carrier
Thermo Foam
High-speed drill set
Drilling Template
YOU MIGHT ALSO BE INTERESTED IN:
Further flush-mounting solutions
We listen
For each product there is a separate FAQ list with frequently asked questions. We make the collected feedback from our customers and our online community available to you, so that there is really no question left unanswered. We are always happy to receive open feedback, because only in this way can we continuously improve and offer customers what they really want!
Well thought out!
Because with some materials, clean drilling is a challenge even for the most experienced professional. The Primo drilling template is just what you need. Measure and mark the first hole, then insert the drilling template, attach it and align it precisely horizontally and vertically using the integrated spirit level. The holes are drilled at standardized intervals in the perfect size. For multiple holes, simply move the drilling template one hole further, align it and continue drilling in no time at all.
Additional treat
All our thermo cans have membrane locking teeth so that inaccuracies in the drill hole are compensated for and the cans are firmly fixed in the drill hole. So Primo makes it child’s play!
If you compare the Primo thermo box with the standard flush-mounted box from the DIY store, then this is correct. But who would compare a Matchbox car with a Porsche?
Primo stands for high-quality premium quality “Made in Germany”, which brings efficiency, time savings and work simplification to the daily work of professionals in the electrical trade. Thanks to the special foaming technology, Primo thermo boxes are installed airtight and without thermal bridges in a matter of seconds.
For example, in contrast to conventional plastering with a bucket of water, stirrer and 25 kg bag of plaster, only one 750 ml can of thermal foam is needed to fix 70 to 100 thermal cans. Foaming itself requires 2 seconds per can compared to 2 – 3 minutes of plastering.
So with Primo:
Invest in good quality, save energy, save time and ensure energy efficiency!
Do you have any questions about our products? We are there for You!
